Electronic spot-welding device for modelling and other hobby applications
With the WELMA 2000 you too can weld like a professional - even in your home model workshop or hobby room.
This electronic spot-welding device has been specially developed for producing assemblies from steel wire. The point where the wires meet is fixed together using a pair of pliers whose tips take the form of welding contacts; when the start switch is pressed, the joint is firmly welded together. During the welding process a current of up to 2500 A flows through the contacts for a few thousands of a second.
The possible applications for this spot-welding device are enormously wide-ranging. For example, it finally solves the problem of assembling the masts and railings of model boats neatly and without oversized, non-scale soldered joints. Masts, bridges, overhead cables and many other metal constructions on model railway layouts can now be produced at home at low cost. Since the steel wire which we recommend and supply is a stainless type, the welded assemblies are even suitable for use outdoors. Even designs for Tiffany applications can be constructed safely and strongly using the WELMA 2000. Model-makers and hobby fans will find many further possible applications for this innovative device.
To accompany this robbe product you will find many additional useful tips for handling the spot-welding device on the website www.welma2000.de, together with suggestions and building instructions for possible designs, and any amount of supplementary information concerning the WELMA 2000.
Input voltage: 230 V
Output voltage: max. 24 V
Welding power graduations: min.; mid.; max. (16/20/24 V)
Welding output: max. 2500 A at 24 V
Welding plier connections: solid screw-clamps
Main case dimensions: 170 x 120 x 80 / 60 mm
LED ready/operating indicator
Recommended steel wire for welded constructions
Diameter: 1 mm Ø Length: 1000 mm (Pack of 10)
Diameter: 1.6 mm Ø Length: 1000 mm (Pack of 10)